EPSON FX-980
4 -
EPSON FX-980
4/99
Binding
Line glue at the top of form (both front
and top entry)
Single side line glue (front entry only)
Envelopes: top entry only
Size
No. 6
6.5
×
3.6 inches (165
×
92 mm)
No. 10
9..5
×
4.1 inches (241
×
105 mm)
Thickness
0.0063 to 0.0205 inch (0.16 to 0.52 mm)
Weight
12 to 24 lb (45 to 90 g/m
2
)
Postcards: front and top entry
Width
3.9 to 5.8 inches (100 to 148 mm)
Length
Front
5.8 inches (148 mm)
Top
3.9 to 5.8 inches (100 to 148 mm)
Thickness
0.0087 inch (0.22 mm)
Weight
51 lb (192 g/m
2
)
Continuous paper (standard and multipart):
front, rear, and bottom entry
Width
4 to 10 inches (101 to 254 mm)
Length
4 to 22 inches (101 to 558 mm)
Copies
1 original
+
up to 5 copies
1 original
+
up to 6 copies (front or bottom entry
with the pull tractor only)
Thickness
Printable area
0.0025 to 0.018 inch (0.065 to 0.46 mm)
Perforated edges
up to 0.035 inch (0.9 mm)
Binding
Point glue or paper staples on both sides
(front, bottom, or rear entry)
Weight (not multipart)
14 to 22 lb (52 to 82 g/m
2
)
Weight (1 sheet of multipart)12 to 15 lb (40 to 58 g/m
2
)
Multipart forms require a straight paper path,
therefore, load them in the front slot.
Continuous paper with labels:
front and bottom entry
Label size (minimum)
0.938
×
2.5 inches (23.8
×
63.5 mm)
0.1 inch (2.5 mm) corner radius
Backing sheet width
4 to 10 inches (101 to 254 mm)
Backing sheet length
4 to 22 inches (101 to 558 mm)
Backing sheet thickness
0.0028 to 0.0035 inch
(0.07 to 0.09 mm)
Total thickness
0.0063 to 0.0075 inch
(0.16 to 0.19 mm)
Label weight
17 lb (64 g/m
2
)
Roll paper:
rear entry with optional roll paper holder only
Width
8.5
±
0.12 inch (216
±
3 mm)
Thickness
0.0028 to 0.0035 inch (0.07 to 0.09 mm)
Weight
14 to 22 lb (52 to 82 g/m
2
)
Paper Alignment
Front entry
Printing starts at the arrow mark. The unprintable area is to the
left of the arrow mark.
Rear entry
Printing starts at “0” on the scale. The unprintable area is to the
left of the “0.”
