Epson ET-4700 Series User Manual Download Page 279

Page: 279 / 292

279

Network Interface Specifications

Wi-Fi

Standard

IEEE 802.11 b/g/n; IEEE 802.11n available only on the 20 MHz
channel

Security

WPA2-PSK (AES); complies with WPA2 with support for
WPA/WPA2 Personal

WEP (64/128 bit); not supported for Wi-Fi Direct mode

Frequency range

2.4 GHz

Maximum Radio-Frequency
Power Transmitted

20 dBm (EIRP)

Coordination modes

Infrastructure mode

Wi-Fi Direct (Simple AP); not supported for IEEE 802.11b

Note:

Wi-Fi Direct Simple AP mode available even if you connect

the product to an Ethernet network.

Ethernet

Standard

IEEE802.3i (10BASE-T); use a category 5e or higher STP (Shielded
Twisted Pair) cable to prevent risk of radio interference

IEEE802.3u (100BASE-TX)

IEEE802.3az (Energy Efficient Ethernet); disabled by default (see
link below to enable)

Note:

The connected device should be IEEE802.3az compliant

Communication mode

Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex

Connector

RJ-45

Security Protocol

SSL/TLS: HTTPS Server/Client, IPPS

Parent topic:

Technical Specifications

Summary of Contents for ET-4700 Series





































































































































































































































































































Search results

Summary of Contents for ET-4700 Series

Reviews:

Brands by name

Popular brands

Epson ET-4700 Series, User Manual

Search results

Summary of Contents for ET-4700 Series

Reviews:

Brands by name

Popular brands