❏
Printer Name
Enter the printer name by using keypad on the printer's control panel. You can enter the following characters.
❏
Character limits: 2 to 15 (you must enter at least 2 characters)
❏
Usable characters: A to Z, a to z, 0 to 9, -.
❏
Characters you cannot use at the top: 0 to 9.
❏
Characters you cannot use at the bottom: -
Note:
If you press OK button without entering the printer name, the default printer name (EPSON and the last six digits of the
printer's MAC address) are set.
❏
TCP/IP Address
❏
Auto
Select when you are using an access point at home or you are allowing the IP address to be acquired
automatically by DHCP.
❏
Manual
Select when you do not want the printer's IP address to be changed. Enter the
IP Address
,
Subnet Mask
, and
Default Gateway
, according to your network environment.
❏
DNS Server
❏
Auto
Select when you want to acquire the IP address automatically.
❏
Manual
Select when you want to set a unique DNS server address to the printer. Enter the addresses for the
Primary
DNS Server
and the
Secondary DNS Server
.
❏
Proxy Server
❏
Use
Select when you are using a proxy server in your network environment and you want to set it to the printer.
Enter the proxy server address and port number.
❏
Do Not Use
Select when you are using the printer in a home network environment.
❏
IPv6 Address
❏
Enable
Select this when using an IPv6 address.
❏
Disable
Select this when using an IPv4 address.
Related Information
&
“Entering Characters” on page 16
User's Guide
Network Settings
24