114
1.
Turn off the document scanner using the
power button.
Note:
There is no power button on the flatbed scanner.
2.
Unplug the AC power cord and disconnect the USB cable that connects the flatbed scanner dock to
the computer.
3.
Clean the outer case with a cloth dampened with mild detergent and water.
4.
If the scanner glass is dirty, clean it with a soft dry cloth. If the glass surface is stained with grease or
some other hard-to-remove material, use a small amount of glass cleaner on a soft cloth to remove
it. Wipe off all remaining liquid.
Caution:
Do not spray glass cleaner directly on the scanner glass. Do not press the surface of the
scanner glass with any force and be careful not to scratch or damage the scanner glass. A damaged
glass surface can decrease the scan quality.
Parent topic:
Summary of Contents for ES-400
