When the format is complete, you see these messages (for a
720KB diskette):
Format complete
730112 bytes total disk space
730112 bytes available on disk
Format another (Y/N)?
You can format another diskette or return to the
OPERATION MENU. Then press 3 and
Enter
to select
System diagnostics.
Starting the floppy disk drive check
To run the floppy disk drive check, select option 6 from
the DEVICE LIST. After you choose the number of times to
run the test, the screen displays this menu:
FLOPPY DISK DRIVE(S) AND CONTROLLER CHECK
MENU
1 - Sequential seek check
2 - Random seek check
3 - Write, read check
4
- Speed check
5 - Run all above checks
0 - Exit
Enter selection number:
Before any checks are performed, the program determines
the number of diskette drives installed in or connected to your
computer. If you have more than one drive, you see this
prompt each time you select a test:
Check which drive (A/B)?
Press
A
or
B
and then
Enter.
If any errors occur during the checks, record the error code
and message and contact your Epson dealer. Always have the
diskette drive serviced by your Epson dealer.
D-14
Performing System Diagnostics
Summary of Contents for Equity LT
Page 1: ...EQUlTY LT User s Guide Y16499100301 ...
Page 4: ...EPSON Equity LT User s Guide ...
Page 7: ...User s Guide ...
Page 149: ......
