Epson EPL-N2000, Reference Manual

Page: 103 / 242

Emulation Menu
Use this menu to select the printer emulation mode. You can
specify different emulations for each interface; in other words,
for each computer you connect. Since each emulation mode has
its own specific options, make settings in the LJ4, ESCP2, FX,
GL2, or I239X menus, as necessary. The options you can set are
the same for every interface.
Setting Parameter
Parallel B, Parallel C, Serial, LT, AUX LJ4, ESCP2, FX, I239X, PS*
1
,
GL2, Auto
*1 Available only when the EPSONScript Level 2 module is installed.
Note:
The default setting may change depending on which option is
installed. Print a status sheet to confirm the current default settings.
Printing Menu
The settings in the Printing Menu can be set from within your
software. The settings you make in your software override
SelecType settings.
All items in the Printing Menu except Resolution can be
accessed directly with the OneTouch Modes. See “Using the
OneTouch Modes” later in this chapter.
Paper Source
Specifies whether paper feeds into the printer from the MP
Tray, the standard lower paper cassette, or from an optional
lower paper cassette.
If you select Auto , paper feeds from the tray containing the
paper that matches the paper selected in the Page Size setting.
R
Albatross Rev. c
A5 size Chapter 5
96/08/23 Pass 0, DR
SelecType 5-9