Epson EMP 5100 - XGA LCD Projector, Owner'S Manual

Page: 27 / 122

9 Connecting to a Computer
• If your system uses a serial mouse, perform steps 6 and 7
using the serial mouse cable instead of the PS/2 mouse cable.
Computer In 1 Computer In 2 Monitor
Audio In 1 Audio In 2 Audio Out
S-Video Video In Audio In
L R
Remote
1-Mouse/ Com-2
Connecting to a PC laptop computer
Before beginning, make sure that the projector and computer are
both turned off.
1. Connect either end of the computer cable to the projectors
Computer In 1 port. The Computer In 2 port is used when
connecting a second computer.
2. Connect the other end of the computer cable to the laptop’s
video (monitor) port.
3. If you wish to view or check images on the computer’s monitor,
connect the cable that came with the monitor to the projector’s
monitor port.
4. Connect the small end of the main cable to the projector’s
Mouse/Com 1 port. The Mouse/Com 2 port is used when you
are connecting a second computer.
5. Connect the PS/2 mouse cable (9-pin) to the mouse terminal on
the large end of the main cable.
Main cable
Audio cable
Monitor cable
Computer cable
PC serial
cable
Serial mouse
cable
PS/2 mouse
cable
PS/2 mouse
cable
Mouse port
Serial port
Monitor port
Audio port
Com port