Epson EMP 5100 - XGA LCD Projector, Owner'S Manual

Page: 14 / 122

x
Introduction
Safety Instructions
These graphics are used throughout the manual to draw your
attention to important information about the EMP-7100/5100.
◆
Note: Additional useful details or tips.
◆
Caution: Steps to avoid damage to your equipment.
◆
Warning: Steps to avoid personal injury.
Always follow these safety instructions when setting up and using the
projector:
1. Do not place the projector on an unstable trolley, stand or table.
2. Do not use the projector near water or sources of heat.
3. Use attachments only as recommended.
4. Use the type of power source indicated on the projector. If you
are not sure of the type of power available, consult your dealer or
local electricity company.
5. Insert the projector’s three-pin earthed plug into a properly
earthed socket. If you have a two-pin socket, contact an electri-
cian to replace it. Do not handle the plug with wet hands.
6. Always take the following precautions when handling the plug.
Failure to do so may result in sparks or fire.
• Ensure the plug is free of dust before inserting it into a socket.
• Ensure that the plug is inserted into the socket securely.
7. Do not overload wall sockets, extension leads or multi-way plug
boards as this may cause fire or electric shock.