Epson EMP 5100 - XGA LCD Projector, Owner'S Manual

Page: 15 / 122

xi
8. Do not place the projector where the cord can be stepped on as
this may result in fraying or damage to the lead or the plug.
9. Unplug the projector from the wall socket before cleaning. Use a
damp cloth for cleaning. Do not use liquid or aerosol cleaners.
10. Do not block the slots and openings in the projector case. They
provide ventilation and prevent the projector from overheating.
Do not place the projector on a sofa, rug or other soft surface or
in a built-in installation unless proper ventilation is provided.
11. Never push objects of any kind through cabinet slots. Never allow
liquid of any kind to spill into the projector.
12. Except as specifically instructed in this Owner’s Manual, do not
attempt to service this product yourself. Opening or removing
covers may expose you to dangerous voltages and other hazards.
Refer all servicing to qualified service personnel.
13. Unplug the projector during thunder storms or if it is not going
to be used for an extended period. Do not place the projector or
remote control on top of heat-emitting equipment or heated
objects such as a car, etc.
14. In the following situations unplug the projector from the wall
outlet and refer servicing to qualified service personnel:
A. If the power cable or plug becomes damaged or frayed.
B. If liquid has been spilled into it or it has been exposed to rain
or water.
C. If it does not operate normally when the operating instruc-
tions are followed or if it exhibits a clear change in perform-
ance indicating the need for servicing.
D. If it has been dropped or the cabinet has been damaged.
Safety Instructions