Epson EMP 5100 - XGA LCD Projector, Owner'S Manual

Page: 61 / 122

43 Changing Menu Settings
8. [Presently Selected] will appear right next to the function you
want to customize instead of [Select]. (If the function has been
selected already, [Presently Selected] appears.)
9. You are now finished.
*If you want to change the function you customized, perform the
above steps 1 to 8 again.
Using the functions:
* The [Volume], [Mute] and [Freeze] buttons are always available,
even when you have customized the above functions. However, if you
press any other button, its function has priority over the other
buttons and the customized function is cancelled.
* If “No Signal” appears on the screen or no supported signal is
being entered, no function will work.
Zoom
1. Press the [Custom] button on the remote control. (Switches to
zoom display mode.)
2. Enlarges the displayed image +1.25 times each time the [Left
Click] button on the remote control is pressed. (An image can be
enlarged up to four times.)
3. Reduces it +0.75 times each time the [Right Click] button on the
remote control is pressed. (An image can be reduced up to one time.)
4. If an enlarged image falls partly outside of the display area, it can
be moved horizontally or vertically to adjust its position by using
the [Pointer] on the remote control.
5. The Zoom function is cancelled by pressing the [Custom] button
on the remote control. (The image returns to previous size.)
Preview
1. Press the [Custom] button on the remote control.
2. The screen turns to black. (This lasts approx. 4 seconds.)