Epson EMP-503 - SVGA LCD Projector, Owner'S Manual

Page: 76 / 111

■ ■ ■ ■
60
Replacing the Lamp
Replace the lamp when:
• The projected image gets darker or starts to deteriorate.
• The projection lamp indicator is flashing orange .
• The message “LAMP REPLACE” appears on the screen
when the projector lamp comes on.
♦
Note:
T o keep the in itial brightn ess an d im age qu ality, replace
the lam p as soon as possible when the m essage appears on the
screen . T he replacem en t m essage is set to bein g displayed at abou t
900 hou rs of u se. Con tact you r local EPSON dealer for a spare
lam p. R equ est part n u m ber ELPLP14.
♦
Warning:
Let the lam p cool before replacin g it. A lso, do n ot
tou ch the glass portion of the lam p assem bly. T ou chin g the glass
portion of the lam p will resu lt in prem atu re lam p failu re.
1. Turn off the power and allow the unit to cool down, then
remove the power cord.
The amount of time needed to cool down will depend on
the ambient temperature.
Downloaded from: http://www.usersmanualguide.com/