Epson EMP-503 - SVGA LCD Projector, Owner'S Manual

Page: 69 / 111

Menu Options
■ ■ ■ ■ ■ ■
53
Storing a User Logo
Follow these steps to capture and store a logo.
1. D isplay the image(with the projector) you wish to use as a
logo.
2. Press the Menu button to open the Menu window.
3. Select the U ser’s Logo menu option by pressing the
pointer button. Then press the Enter button to display the
U ser’s Logo Setting window.
4. The message, “D o you use the present image as a user
logo?” appears on the screen. Choose Yes or N o by
pressing left or right of the Enter button. Then press
Enter button.
5. When you choose “Yes” in the step 4, a selection box will
appear over the image. To select the portion of the image
you wish to use as the logo, use the Enter button. O nce
you have selected the desired area, press the Enter button.
6. The message “D o you use this image?” appears on the
screen. Select Yes and press the Enter button. If you want
to change the position, select N o.
7. N ext, the Z oom rate setting window appears on the
screen. Select a rate using the arrow buttons, then press
the Enter button.
8. The message “D o you save this user logo?” appears on the
screen. Select Yes and press the Enter button. If you don’t
want to save the logo, select N o.
♦
Note:
Savin g the logo m ay take a m om en t. Do n ot u se the
projector or other sou rces ( com pu ter, video, speaker, etc.) while
the logo is bein g saved.
9. When the message “Saving the user logo is completed”
appears on the screen, press the Menu or Enter button to
display the Main Menu.
Downloaded from: http://www.usersmanualguide.com/