Epson EMP-503 - SVGA LCD Projector, Owner'S Manual

Page: 45 / 111

Turning the Equipment On and Off
■ ■ ■ ■ ■ ■
29
Turning the Equipment On and Off
Turn on the projector and its attached equipment in the
following order.
1. Computer
2. Video source
3. Audio source (if different from computer or video source)
4. Projector
5. External speaker or PA system (if necessary)
When you turn off the equipment, do so in the reverse order.
Turning the Projector On and Off
1. Remove the projector lens cap.
2. When you plug in the projector power cord, the power
indicator flashes orange for few seconds. Then the light
remains orange.
3. Press the Power button on the remote control or
operation panel. The power indicator flashes green as the
projector warms up. When the projector is fully warmed
up, this light remains green.
If computer or video equipment is attached, the computer or
video signal is projected.
♦
Warning:
N ever look in to the len s when the lam p is on . T his can
dam age you r eyes. I t is especially im portan t that children are n ot
allowed to look in to the len s.
♦
Caution:
W hen tu rn in g the projector on or off with the rem ote
con trol, be su re to tu rn the rem ote con trol on first with the power
switch.
Downloaded from: http://www.usersmanualguide.com/