Epson EH-TW710 User Manual Download

Page: 145 / 179

Projector Lamp Maintenance

145

Warning

When replacing the lamp, there is a possibility that the lamp may be

broken. If replacing the lamp of a projector which has been installed on the

ceiling, you should always assume that the lamp is cracked, and you should

stand to the side of the lamp cover, not underneath it. Remove the lamp

cover gently. Be careful when removing the lamp cover as shards of glass

may fall out and could cause an injury. If any shards of glass get into your

eyes or mouth, contact a doctor immediately.

Slide the lamp cover out and lift it off.

Loosen the screws securing the lamp to the projector. The screws do

not come all the way out.

Grip the raised section of the lamp and remove it.

Summary of Contents for EH-TW710




















































































































































































Search results

Summary of Contents for EH-TW710

Reviews:

Related manuals for EH-TW710

Brands by name

Popular brands

Epson EH-TW710, User Manual

Search results

Summary of Contents for EH-TW710

Reviews:

Related manuals for EH-TW710

Brands by name

Popular brands