Epson EB-1751, User Manual, Page: 83 / 146

Submenu Function
Split Screen
(EB-1776W/
EB-1771W/
EB-1761W only)
You can split the screen into two screens.
You can change the
Screen Size , and select the Source , Swap
Screens , Audio Source , and Exit Split Screen .
s
"Projecting Two Images Simultaneously (Split Screen)
(EB-1776W/EB-1771W/EB-1761W Only)" p.49
Control Panel
Lock
You can use this to restrict operation of the projector's control
panel.
s
"Restricting Operation (Control Panel Lock)" p.73
Pointer Shape
You can select the shape of the pointer.
Pointer 1:
Pointer 2:
Pointer 3:
s
"Using the Remote Control to Operate the Mouse Pointer
(Wireless Mouse)" p.64
Power Consump‐
tion You can set the lamp brightness to one of two settings.
Select
ECO if the images being projected are too bright, such as
when projecting images in a dark room or onto a small screen.
When
ECO is selected, the power consumption is changed as
follows, and fan rotation noise during projection is reduced.
Electrical consumption: about 27% decrease
Volume
You can adjust the volume. Setting values are saved for each
source.
Remote Receiver
You can limit the reception of the operation signal from the
remote control.
When set to
Off , you cannot perform any operations from the
remote control. If you want to make operations from the remote
control, hold down the [Menu] button on the remote control or
the control panel for at least 15 seconds to reset the setting to its
default value.
Submenu Function
User Button You can select and assign an item from the Configuration menu
with the remote control's [User] button. Pressing the [User]
button directly displays the assigned menu item selection/
adjustment screen, allowing you to make one-touch changes to
settings/adjustments. You can assign one of the following items
to the [User] button.
Power Consumption , Info , Progressive , Test Pattern , Multi-
screen , and Resolution
Test Pattern
You can display a test pattern to adjust the projection without
connecting other equipment when you set up the projector.
While the test pattern is displayed, keystone correction, zoom,
and focus adjustments can be performed.
To cancel the test pattern, press the [Esc] button on the remote
control or the control panel.
Attention
If a test pattern is displayed for a long time, a
residual image may be visible in projected images.
Reset
You can reset all adjustment values on the Settings menu to their
default settings, except for User Button .
See the following to return all menu items to their default
settings.
s
"Reset Menu" p.94
List of Functions
83