Epson EB-1751, User Manual, Page: 65 / 146

Page Up/Down
[
[
] button: Moves to the previous page.
[
]
] button: Moves to the next page.
a
•
When any pair of adjacent [ ], [ ], [ ], or [ ]
buttons are pressed at the same time, the pointer can be moved
diagonally.
•
If the mouse button settings are set to reverse on the computer, the
operation of the remote control buttons will also be reversed.
•
The Wireless Mouse function does not work under the following
conditions.
- When the Configuration menu or a Help screen is displayed
- When operating functions other than the Wireless Mouse function
(such as adjusting the volume).
However, when using the E-Zoom or Pointer function, the page up
or down function is available.
Correcting the Color Difference when Projecting
from Multiple Projectors
When multiple projectors are lined up and projecting images, you can
correct the brightness and color tone of each projector's image with multi-
screen color adjustment so that the colors of images from each projector
match closely.
a
In some cases the brightness and color tone may not match completely
even after correction.
Summary of correction procedure
When multiple projectors are set up and you need to make corrections, use
the following procedure to correct one projector at a time.
1. Set the projector ID.
Set a unique projector ID for the target projector so that you can limit which
projector is being corrected.
2. Correct the color difference.
You can carry out color correction when projecting from multiple projectors.
You can adjust from black to white in five stages called levels 1 to 5, and in
each of these 5 levels you can adjust the following two points.
•
Correcting brightness
You can correct the image brightness to make them all equal.
•
Correcting color
You can correct the image color so that they match closely.
Setting an ID and using the remote control
By setting an ID for each projector, you can limit which projector is
operated from the remote control.
You can set an ID for the projector within a range of "1" to "9". The default
value is Off.
On the remote control, select the Projector ID from 0 to 9 for the projector
you want to operate. The following examples show the combination of IDs
for the Projector ID and the ID selected with the remote control.
Opera‐
tion
Combinations Descriptions
Possible Projector ID: 1 When the Projector ID and
the ID selected with the
remote control match, you
can operate the projector
from the remote control.
Projection Functions
65