Using the Product Safely
7
Touch Unit installation location
•
When using the Touch Unit, install the projector using one of the following methods. The Touch Unit cannot be used
if another installation method is used.
•
Mount the projector on a wall or suspend it from a ceiling and project images from in front of the screen.
•
Install vertically on a table and project from the front of the desk. (When installing vertically on a table, you need
the optional Interactive Table Mount (ELPMB29).)
•
Before installing the Touch Unit, make sure that the installation surface is not warped or distorted, and that any
unevenness on the screen surface is less than 5 mm.
•
When installing the Touch Unit on a whiteboard, secure the Touch Unit with magnets or screws.
•
When installing the Touch Unit outside the whiteboard, you need the supplied Touch Unit Bracket.
