3.
Right-click the scanner, and then click
Install
.
Click
Continue
when the
User Account Control
screen is displayed.
Click
Uninstall
and start again if the
Uninstall
screen is displayed.
Note:
The scanner name you set on the network and model name (EPSON XXXXXX (XX-XXXX)) are displayed on the
network screen. You can check a scanner’s name that was set on the network from the scanner’s control panel.
4.
Click the message displayed on the computer, which says that your device is ready to use.
5.
Check the message on the screen, and then click
Close
.
>
Scanning Using the Scanner’s Control Panel
>
95