1.
Set the connection mode switch on the scanner to
AP mode
.
2.
Open the input tray and turn on the scanner.
3.
Press and hold the
Connect
button for at least 3 seconds until the
Status
and
!
error lights flash
alternately.
The scanner enters standby status for WPS connection for two minutes.
4.
Press the
WPS
button on your computer or device, or enable the WPS feature.
When the
Status
light on the scanner stays on, the connection is established.
Parent topic:
Wi-Fi Protected Setup (WPS)
If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
scanner to the network using Wi-Fi Protected Setup (WPS).
37
Summary of Contents for DS-560
