Publishing Discs
28
Drive Settings
(except for Read Back mode)
Number of write retries
Select 0 to 9 for the Number of write retries.
The Number of write retries is a setting to retry writing if a write error occurs.
Setting the Number of write retries will enable the job to continue without pausing if a write
error occurs.
Drive Settings
(for Read Back mode)
No. of read back errors allowed
Select 0 to 9 for the No. of read back errors allowed.
Setting the No. of read back errors allowed will enable jobs to continue without pausing
until the set number of read back errors continuously occur. When a read back error
occurs, the disc will be ejected as an error disc and reading the next disc will be processed.
Continue publishing regardless of the occurrence of read back errors
If you check this checkbox, no matter how many times a read back error occurs, the jobs
will continue without pausing. When a read back error occurs, disc will be ejected as an
error disc and reading the next disc will be processed.
Printer Settings
Printer name
Select Printer Name.
Note:
When changing the printer name, do not use Unicode characters. The device will not be recognized
correctly.
Failure error mark
If you check this check box, an error mark will be printed on any disc with a write error. This
is useful to identify the disc which encountered the write error.
The disc with the write error will be ejected to stacker 3.
Summary of Contents for Disc Producer PP-50
