Using Your Software
18
Setting a Working Folder and Log
After the software installation, create a
Working Folder
on the hard disk for the disc
publishing operation. You can also set for log files. Log files are useful for service and
support of the product.
Note:
These settings are reflected for all the CD/DVD/BD publishers registered (except for the PP-100N).
1. Select
Start
(
) -
All Programs
-
EPSON Total Disc Maker
-
EPSON Total Disc
Setup
.
The EPSON Total Disc Setup will start.
2. Select
Common Setting for Publishing
from the
Tool
menu.
The
Common Setting for Publishing
screen will appear.
3. Click
Browse
to select a folder to create a
Working Folder
.
Note:
Select a drive with sufficient free space. For information on the necessary HDD space, see the
following section.
&
See “System Requirements” on page 15.
4. Check the checkbox for
Save publication log
if you want to save the usage history of
the product.
Note:
When the log files saved in the computer exceed 200MB, the older ones will be deleted (starting
with the oldest one) to make room for new ones.
5. Click
OK
.
Summary of Contents for Disc Producer PP-50
