Epson Color Laser Printer Owner'S Manual Download Page 175

Page: 175 / 274

EpsonNet Direct Print

175

Setting Up Your Printer Using EpsonNet
Direct Print

When setting up a printer to print with LPR, you can add both a
printer located in the same segment and one located beyond a
router.

Note:

❏

Be sure that the computer is connected to the network and TCP/IP
is correctly set.

❏

The valid IP address must be set; otherwise the printer does not
appear under the Epson_lpr group icon.

❏

The EPSON Status Monitor 2 utility shipped with the interface card
models C82362

✽

/C82363

✽

/C82364

✽

with software version 1.x

and EPL-N2700/N4000 printers enables EPSON TCP/IP printers.
These EPSON TCP/IP printers can coexist with lpr printers added
by EpsonNet Direct Print.

❏

The job control functions such as

Cancel Printing

and

Purge Print

Jobs

are available when you double-click the target printer icon in

the Printers folder. However, if the printer has already started
printing a document, the print job may not be cancelled completely.

Adding a printer located in the same segment

Follow the steps below to add a printer located in the same
segment.

Windows Me:

Double-click the

My Network Places

icon.

Windows 98/95/NT 4.0:

Double-click the

Network

Neighborhood

icon.

Summary of Contents for Color Laser Printer



















































































































































































































































































Search results

Summary of Contents for Color Laser Printer

Reviews:

Related manuals for Color Laser Printer

Brands by name

Popular brands

Epson Color Laser Printer, Owner'S Manual

Search results

Summary of Contents for Color Laser Printer

Reviews:

Related manuals for Color Laser Printer

Brands by name

Popular brands