Epson Color Laser Printer Owner'S Manual Download Page 156

Page: 156 / 274

156

Settings for NetWare Server

❏

For Queue Based connection:

NDS Context:

Type the NDS context.

Print Server Name:

Print server name that is already

defined in NDS or Bindery. If the printer is in the Remote
Printer mode, enter the print server name that is used
when PSERVER.NLM is loaded.

Printer Name:

Printer name that is already defined in

NDS or Bindery.

NDS Volume for Print Queue:

The format is as follows:

Format: NDS Volume and context
For example: NDPS_SERVER_SYS.EPSON

File Server for Print Queue:

Enter the file server name for

the print queue.

IPX Network Number:

Enter the IPX network number of

the print server.

IPX Node Number:

Enter the IPX node number of the

print server.

6. When you finish filling in the boxes, press

Finish

. Follow the

on-screen instructions.

7. The Select Printer Drivers dialog box appears. Select an

appropriate printer driver for Windows Me/98/95 and
Windows 2000/NT 4.0. Be sure to select the correct printer
driver for your printer from the appropriate menus.
Windows 3.1 is not supported.

8. Click

Continue

9. Confirm the Printer Agent that you have just created.

In NetWare Administrator, double-click the NDPS Manager
object and click

Printer Agent List

. Check that the status of the

Printer Agent you have just created is “Idle”.

Summary of Contents for Color Laser Printer



















































































































































































































































































Search results

Summary of Contents for Color Laser Printer

Reviews:

Related manuals for Color Laser Printer

Brands by name

Popular brands

Epson Color Laser Printer, Owner'S Manual

Search results

Summary of Contents for Color Laser Printer

Reviews:

Related manuals for Color Laser Printer

Brands by name

Popular brands