Network Setup
31
Network Setup
This section provides detailed instructions for setting up your product on a
wireless or wired network.
Make sure you follow the instructions on the
Start Here
sheet to set up your
product, choose your connection, and install the software. The on-screen
instructions during the installation process help you set up your network
connection. Follow the instructions in this chapter only if you need additional
help:
■
For wireless network setup, see below.
■
For wired network (Ethernet
®
) setup, see page 45.
Wireless Network Setup
The steps in this section provide detailed instructions for setting up your product
on a wireless network.
You must install the software on every computer from which you want to print.
For the first installation, we recommend using a USB cable (not included) to
simplify wireless setup. After the printer is connected to the network, you will be
prompted to remove the cable.
If you’re using Mac OS X 10.6 or don’t have a USB cable, you’ll need to use the
buttons on the printer to select wireless settings instead.
Note:
If you have trouble setting up your product, see “Network Problems” on page 49.
■
If this is the first time that you’re installing the product, see “Installing for the
First Time” on page 32.
■
If your product is already on your wireless network and you need to set up
additional computers to print to the product, see “Setting Up Additional
Computers” on page 42.
Summary of Contents for C11CA69201
Page 64: ...CPD 27869 Printed in XXXXXX ...
