If you place the printer on a stand, follow these guidelines:
❏
Use a stand that supports at least 9 kg (19 lb).
❏
Never use a stand that tilts the printer. Always keep it level.
❏
Provide enough clearance below the stand and between the
legs of the stand so your continuous paper flows smoothly.
❏
Place cables so they do not interfere with paper feeding;
secure them to a leg of the stand if possible.
Assembling the Printer
Follow the steps in this section to get your printer up and
running.
Installing the knob
1. Insert the knob into the hole in the printer’s right side and
rotate it slowly until it slips onto the shaft.
2. Push firmly on the knob until it fits against the printer case.
1-08
L
Blackberry REV.E
A5 size
Chapter 1
96/04/08
pass 1
1-4
Setting Up the Printer
Summary of Contents for C11C638001 - LQ 300+II B/W Dot-matrix Printer
Page 1: ......
Page 18: ...L Blackberry REV E A5 size Introduction 96 04 08 6 Introduction ...
Page 118: ...L Blackberry REV D A5 size Index 95 05 08 4 Index ...
Page 120: ......