background image

EPSON Stylus Photo 900

5/03

EPSON Stylus Photo 900

 - 7

Paper Loading Guidelines

You can load the following number of sheets of EPSON 
special media:

Load all paper with the printable side up. It’s usually whiter 
or brighter than the other side.

If the paper has a cut corner, position it in the upper right 
corner as you load it in the sheet feeder.

Check the paper package for additional instructions on 
using special papers.

Load envelopes 10 at a time and set the paper thickness 
lever to the

 

 

position.

Loading Roll Paper

You can load the following types and sizes of roll paper:

1. Remove the tape and protective paper from the end of the 

roll. Then insert the holders into the roll of paper as shown.

2. Make sure the end of the paper is cut straight across, with 

90° corners. If the end is cut diagonally, you may have 
problems feeding the paper.

3. If the paper curls at the end, fold a sheet of paper over the 

end and roll it backward to uncurl it.

Avoid touching the printable surface of the roll paper.

4. Remove any paper that’s in the sheet feeder at the top of the 

printer. Then remove the paper support, lower the output 
tray, and turn on the printer.

5. Make sure the paper thickness lever is set to the 

 

position.

Paper type

Loading capacity

Premium Bright White Paper

100 Sheets

Photo Quality Ink Jet Paper

65 sheets

Photo Quality Ink Jet Cards

30 cards with a support sheet 
beneath the stack

Glossy Photo Paper or Photo Paper

20 sheets

Panoramic Photo Paper

1 sheet with a support sheet 
beneath the sheet

Matte Paper Heavyweight

20 sheets with a support sheet 
beneath the stack

ColorLife Photo Paper

1 sheet with a support sheet 
beneath the sheet

Double-Sided Matte Paper
Premium Glossy Photo Paper
Premium Semigloss Photo Paper
Premium Luster Photo Paper
Ink Jet Transparencies
Iron-On Transfer Paper
Photo Stickers
Photo Quality Self Adhesive sheets
Glossy Photo Greeting Cards

1 sheet

Paper name

Roll sizes

EPSON Premium Glossy Photo 
Paper

4 inches × 26 feet
8.3 inches (A4) × 32.8 feet

EPSON Premium Semigloss 
Photo Paper

4 inches × 26 feet

EPSON Premium Luster Photo 
Paper

8.3 inches (A4) × 32.8 feet

Summary of Contents for C11C501061 - Stylus Photo 900 Color Inkjet Printer
















Reviews: