background image

EPSON Stylus Photo 900

2 -

 EPSON Stylus Photo 900

5/03

Printer Specifications

Printing

Printing method

On-demand ink jet

Nozzle
Configuration

48 nozzles (each color) × 6
Black, cyan, magenta, yellow, light cyan,
light magenta

Resolution

Maximum 5760 × 720 optimized dpi

Print direction

Bidirectional with logic seeking

Control code

EPSON ESC/P

®

 Raster, EPSON Remote

Input buffer

32 KB

Interfaces

USB and bi-directional IEEE 1284

Mechanical

Paper feed

Friction

Paper path

Sheet feeder, top entry

Sheet feeder
capacity

100 sheets of 17 lb (65 g/m

2

) paper

Dimensions

Storage

Width: 19.4 inches (493 mm)
Depth: 12.0 inches (305 mm)
Height: 7.2 inches (183 mm)

Printing

Width: 19.4 inches (493 mm)
Depth: 21.5 inches (546 mm)
Height: 11.9 inches (302 mm)

Weight

15.2 lb (6.9 kg) without ink cartridges

Ink Cartridges

Colors

Black, cyan, magenta, yellow, light cyan
light magenta

Print capacity

Black

540 pages (A4, ISO/IEC 10561 Letter
Pattern at 360 dpi, 5% coverage)

Color

330 pages (A4, 360 dpi, 15% coverage)

Cartridge life

2 years from production date (if 
unopened); within 6 months after
opening package, at 77 ºF (25 ºC)

Dimensions (W × D × H)

Black

0.8 × 2.4 × 1.5 inches
(20.1 × 60 × 38.5 mm)

Color

1.9 × 3.3 × 1.6 inches
(49.1 × 84.05 × 41.8 mm)

Storage
temperature

–4 to 104 ºF (–20 to 40 ºC)
1 month at 104 ºF (40 ºC)

Transit 
temperature

–22 to 140 ºF (–30 to 60 ºC)
1 month at 104 ºF (40 ºC)
20 hours at 140 ºF (60 ºC)

Freezingtemperature**

Black

3.2 ºF (–16 ºC)

Color

–0.4 ºF (–18 ºC)

*

The figure given is based on continuous printing after ink 
replacement. The actual print capacity may vary.

** Ink thaws and is usable after approximately 3 hours at

77 °F (25 °C)

To ensure good results, use genuine EPSON cartridges 
and do not refill them. Other products may cause 
damage to your printer not covered by EPSON’s 
warranties. Don’t use an ink cartridge beyond the 
expiration date on the package.

Electrical

*

Check the label on the back of the printer for its voltage.

Environmental

Temperature

Operation

50 to 95 ºF (10 to 35 ºC)

Storage*

–4 to 104 ºF (–20 to 40 ºC)
1 month at 104 ºF (40 ºC)

Transit*

–4 to 140 ºF (–20 to 60 ºC)
120 hours at 140 ºF (60 ºC)

Humidity (without condensation)

Operation

20 to 80% RH

Storage*

5 to 85% RH

*

Stored in shipping container

Specification

120 V model

220-240 V model

Rated voltage

120 V

240 V

Input voltage range*

99 to 132 V

198 to 264 V

Rated frequency range

50 to 60 Hz

Input frequency range

49.5 to 60.5 Hz

Rated current

0.3 A (max 0.5 A)

0.2 A (max 0.3 A)

Power consumption

Approx. 12 W (ISO 10561 Letter Pattern)

Approx. 5 W in
sleep mode

Approx. 5.5 W in
sleep mode

Approx. 0.2 W in 
standby mode

Approx. 0.3 W in 
standby mode

Summary of Contents for C11C501061 - Stylus Photo 900 Color Inkjet Printer
















Reviews: