manualshive.com logo in svg

Epson Apex 286/12, User Manual, Page: 23 / 128

Share
Download
Epson Apex 286/12 User Manual Download Page 23

1-7 Control Panel

The control panel provides several useful functions which are ex-
plained below. You are likely to use the front panel frequently, so let’s

start there.

Figure 1-4: Front Panel

Reset Button

The reset button allows you to restart the system without turning the
power off.

If you encounter any problems while using unfamiliar software, you can
always restart quickly from the RAM test stage by pressing the reset
button. Note, however, that any data which have not been saved to

disk will be lost.

Turbo Button

The Turbo button allows you to change the running speed of the

microprocessor to accommodate software requirements.

Some

software applications must be run at a slow clock speed.

Indicator Lights

Two lights indicate the operation status of your computer. The green
LED is lit when the power is on. The red LED comes on when the hard
disk is being accessed.

8

Chapter 1: System Overview

Summary of Contents for Apex 286/12

































































































































Reviews:

No comments