manualshive.com logo in svg

Epson Apex 286/12, User Manual, Page: 126 / 128

Share
Download
Epson Apex 286/12 User Manual Download Page 126

interface

- A means for electronic machines to communicate. Inter-

face also means to communicate with a computer and its

peripheral components.

kilobyte (KB)

- A single data unit that is composed of 1024 bytes.

math coprocessor

- A math coprocessor lets you do arithmetic and calcula-

tions more efficient.

megabyte (MB)

- A single data unit that is composed of 1,048,576 bytes.

memory address

- A hexadecimal or decimal value given to a memory loca-

tion.

microprocessor

- This is an integrated circuit that receives coded instruc-

tions for execution. It is also referred to as a CPU.

modem

- A modem lets your computer communicate with other

computers over telephone lines.

motherboard

- It is the main printed circuit board in the system case. It

is also known as a mainboard or systemboard.

MS-DOS

- The Microsoft Disk Operating System. This is the most

popular operating system for IBM PCs and compatibles.

network

- A network lets everyone in your group communicate with

one another or share the cost of high-performance
resources.

Chapter 7: Glossary

5

Summary of Contents for Apex 286/12

































































































































Reviews:

No comments