manualshive.com logo in svg

Epson Apex 286/12, User Manual, Page: 17 / 128

Share
Download
Epson Apex 286/12 User Manual Download Page 17

1-1 

Introduction

This manual will guide you through the setup of your computer and

provide the information necessary to tailor the system to fit your needs.

If you are a novice, you will be able to have your computer up and
running with a minimum of fuss. You will also gain valuable hands-on
experience by following the easy step-by-step instructions. If you are
an advanced user, you will appreciate the affordable power of this
system.

Your computer is compatible with the PC/AT This means that virtually
all the software available for the PC/AT can also be run on your
computer. Moreover, the keyboard commands used on a PC/AT can

also be used on your computer. For example, the same 

<Ctrl> 

<Alt>

<Del> combination of keystrokes used for the software reset on the
PC/AT may also be used on your computer. Quality, flexibility, and

functionality are the key design features of your computer. For this

reason, this computer is the ideal choice for a person seeking affor-

dable AT-style power.

The clear, well-illustrated instructions in this manual ensure that even

if you are a newcomer to the computer world, you will have your

computer installed and running with a minimum of effort.

Operating System

Your computer uses the MS-DOS

®

 operating system. For more details

on this operating system, please refer to the Microsoft

®

 MS-DOS

User’s Guide and User’s Reference. This manual is included with your

system.

2 Chapter 1: System Overview

Summary of Contents for Apex 286/12

































































































































Reviews:

No comments