Paper Size Warning
Control panel:
Ready
light on
The size of the paper that fed through the printer does not match the specified paper size. Click
Close
on the EPSON Status Monitor 3 window that appears to dismiss the warning.
Not All Pages Are Printed
Control panel:
Ready
light on
This warning is displayed if an Insufficient Memory to Print Current Page error has occurred
while
Auto Continue
is set to
On
. Click
Close
on the EPSON Status Monitor 3 window that
appears to dismiss the warning.
Warming Up
Control panel:
Ready
light flashing
Indicates that the printer is warming up to process and print data.
Replace Photoconductor Unit
Control panel:
Ready
light flashing (flashes at longer intervals than usual)
Indicates that the photoconductor unit is close to the end of its service life (less that 5%). Prepare a
new photoconductor unit to replace the current one. See “Photoconductor Unit” on page 74 for
instructions.
To temporarily dismiss the warning, click
Close
on the EPSON Status Monitor 3 window that
appears. Resetting the photoconductor unit also clears the warning.
Toner Low
Control panel:
Ready
light flashing (flashes at longer intervals than usual)
Indicates that the developer cartridge is nearly out of toner. Prepare a new developer cartridge to
replace the current one. See “Developer Cartridge” on page 69 for instructions.
Installed Developer Cartridge is Not a Genuine Epson Product Warning
Control panel:
Ready
light flashing (flashes at longer intervals than usual)
EPSON AcuLaser M1200 Series User’s Guide
Troubleshooting
94
