manualshive.com logo in svg

Epson aculaser cx37 series, User Manual, Page: 203 / 261

Share
Download
Epson aculaser cx37 series User Manual Download Page 203

Avoid...

Allowing the output tray to overfill 

(the output tray has a 150 sheet capacity of plain paper or a 10 sheet capacity of special

paper—misfeeding may occur if you allow more than 150 sheets of plain paper or 10 sheets of special paper to accumulate at
one time)

.

Clearing Media Misfeeds 

To avoid damage, always remove misfed media gently, without tearing it. Any piece of media left in the
machine, whether large or small, can obstruct the media path and cause further misfeeds. Do not
reload media that has misfed.

Note:

The image is not fixed on the media before the fusing process. If you touch the printed surface, the toner
may stick to your hands, so be careful not to touch the printed face when removing the misfed media.
Make sure not to spill any toner inside the machine.

c

Caution:

❏

Unfused toner can mess your hands, clothes, or anything else it gets on.
If you accidentally get toner on your clothes, lightly dust them off as best as you can. If some
toner remains on your clothes, use cool, not hot water, to rinse the toner off. If toner gets on
your skin, wash it off with cool water and a mild soap.

❏

If you get toner in your eyes, wash it out immediately with cool water and consult a doctor.

If, after clearing the media misfeed, the misfeed message in the control panel window persists, open
and close the engine covers. This should clear the misfeed message.

Media Misfeed Messages and Clearing Procedures

Media Misfeed Message

Page Reference

PAPER MISFEED

 

OPEN RIGHT DOOR

“Clearing a Media Misfeed in Tray 2” on page 206

PAPER MISFEED

 

OPEN RIGHT DOOR

“Clearing a Media Misfeed in Tray 3” on page 210

FUSER JAM 

 

OPEN RIGHT DOOR

“Clearing a Media Misfeed from the Fuser Unit” on page 215

TRANSFER ROLLER JAM 

 

OPEN RIGHT DOOR

“Clearing a Media Misfeed in Tray 3” on page 210

Epson AcuLaser CX37 Series     Printer/Copier/Scanner User’s Guide

Troubleshooting     

203

Summary of Contents for aculaser cx37 series






































































































































































































































































Reviews:

No comments