manualshive.com logo in svg

Epson ActionPrinter 2250, User Manual

Share
Download
Epson ActionPrinter 2250 User Manual Download Page 70

Troubleshooting

l

The paper does not eject properly.

The page may be too long. Tear off the fresh supply of paper

and eject the page from the printer. Use only paper that is

within the specified length range described in the Appendix.

l

When you switch between single sheets and continuous paper, the

beeper sounds several times and the 

READY 

light goes off

You may have tried to change the paper-release lever

position while paper remained in the printer. Return the

paper-release lever to the previous position and eject paper

(or feed paper to the paper-park position). Then change the

paper-release lever position.

l

The 

paper 

does not feed backward to the paper-park position 

or 

the tear-

off feature does not work.

You may have set the back-feed setting in the default-setting

mode to Disable. Set the back-feed setting to Enable. See

“Changing the default settings” on page 3-7. However, when

you print on labels, make sure you set the back-feed setting

to Disable.

3-26

Using the Printer

Summary of Contents for ActionPrinter 2250











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands