manualshive.com logo in svg

Epson ActionPrinter 2250, User Manual

Share
Download
Epson ActionPrinter 2250 User Manual Download Page 68

Troubleshooting

Regular 

gaps 

occur in the printout.

One-inch skip-over-perforation may be set. Set skip-over-
perforation to off in the default-setting mode. See “Changing
the default settings” on page 3-7.

Note:

You can use data dump mode to find the cause of
communication problems between the printer and your

software programs. See page 3-4.
If the printer still does not print correctly, try the self test
described in Chapter 1. If the self test works properly, the
printer is all right, and the problem probably lies in the
computer, the software, or the cable. If the self test does not
work, contact your dealer or a qualified service person.

Paper handling

Single sheets do not feed properly from the paper cassette.

When the push tractor is installed, the platen does not rotate and paper

does not feed.

Check that the paper-release lever is in the lower, single-
sheet position.

The platen rotates but paper does not feed and the READY light flashes.

The paper cassette is out of paper. Load paper in the
cassette.

Paper feeding is crooked 

or 

the 

paper 

jams.

Turn off 

the 

printer and pull out the paper. Remove the

paper cassette and make sure the paper is properly loaded in
the paper cassette.

Pages do 

not 

fully eject.

Use the 

LF/FF 

button to eject the pages.

3-24

Using the Printer

Summary of Contents for ActionPrinter 2250











































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands