Epson ActionPrinter 2250, User Manual

Page: 54 / 106

Using the Default-Setting Mode
7.
Press the
LF/FF
button to change the setting. The
READY
light
turns on or off to show your selection, as indicated in Table B,
and your new setting is saved automatically and remains in
effect until you change it.
If you are changing the character table, page length, or TOF
position, go to step 8 next. Otherwise, go to step 9.
8. If you are changing the character table, page length, or TOF
position, you must make additional settings as shown in the
tables below. Press the
LF/FF
button until light 1, light 2, and the
READY
light indicate your selection. Then press the
FONT
button
to set the feature.
Once you press the
FONT
button, the printer advances to the next
item in table B and your setting is saved automatically. The new
setting remains in effect until you change it.
3-10 Using the Printer