Epson ActionPrinter 2250, User Manual

Page: 40 / 106

Switching Between Continuous Paper and Single Sheets
0
CAUTION:
If you lower the paper-release lever while
continuous paper is still loaded, the printer beeps five
times and the
READY
light goes off. If this happens, raise
the paper-release lever and press the
LF/FF
and
FONT
buttons at the same time to reverse the paper to the paper-
park position. You can then lower the lever again.
3. The printer is ready to print. When it receives data, it
automatically loads a single sheet from the paper cassette and
begins to print.
Switching to continuous paper
To switch from single sheets back to continuous paper, follow these
steps:
1. If a single sheet is in the paper path, hold the
LF/FF
button down
to eject it.
2. Raise the paper-release lever and push it firmly into the
continuous-paper position.
CAUTION:
If you raise the paper-release lever when a
single sheet is in the paper path, the printer beeps and the
completely. Then raise the lever again.
3. The printer is ready. When the printer receives data, it
automatically loads continuous paper from the push tractor and
begins to print.
2-14
Paper Handling