Epson ActionNote 866C, User Manual

Page: 34 / 139

7. You can now highlight the Security option and select
either
S E T U P
,
which applies the password to the Setup
program, or
S Y S T E M
, which applies the password to all
programs and data on your computer. If you choose
S Y S T E M
,
you will be prompted to enter the password
whenever you turn on the computer or try to run Setup.
Deleting or changing a password
If you want to delete or change a password, follow these steps:
1. Highlight the Password option. You see a warning and
message prompting you to press
Enter.
2.
Press
Enter.
You see a message prompting you to enter your
p a s s w o r d .
3. Type your password. You see only squares on the screen.
4.
Press
Enter.
You see another message prompting you to
enter a new password or press the / key to remove the
p a s s w o r d .
5. If you are deleting your password, press the / key. The
Password option setting is changed to Disabled.
If you are changing your password, type the new password.
You see only squares displayed on the screen.
6.
Press
Enter.
You see a message asking you to verify the
password by entering it again.
7. Type the password again and press
Enter.
(If you enter an
incorrect password, you must start the process over again.
Keep trying until you have entered the password correctly
twice in a row.) You see a message confirming your
password installation.
8. Press any key to continue.
Setting Up the Computer
1 - 1 5