background image

How to Use This Manual

This manual explains how to setup and operate your computer
and install options.

You do not need to read everything in this book to use your
computer; see the following chapter summaries to find the sections
you need:

Chapter 1 

provides steps for setting up your computer.

Chapter 

2 covers basic information about using the computer.

Chapter 

3 explains how to power your computer using the AC

adapter and the battery. It also describes ways to conserve battery
power.

Chapter 4 

describes how to connect optional devices.

Chapter 5 

describes how to run the Setup program; this is

necessary if you want to set a password or you change the
configuration of your computer.

Chapter 6 

describes the VGA utilities provided with your system.

Appendix A 

provides troubleshooting tips.

Appendix B 

provides basic information about the internal

modem and summarizes its commands.

Appendix C 

contains the specifications for your ActionNote

computer.

At the end of the manual, you’ll find a Glossary and an 

Index.

Introduction 5

Summary of Contents for ActionNote 4SLC2-50



























































































































































Reviews: