background image

ActionLaser II

Paper size:

Paper sizes using SelecType

Paper:

Type

Size

A4

210 x 297 mm

A5

148 x 210 mm

B5

182 x 257 mm

F4

210 x 330 mm

Letter

8.5 x 11 inches

Legal

8.5 x 14 inches

Half-Letter

5.5 x 8.5 inches

Executive

7.25 x 10.5 inches

Government Legal

8.5 x 13 inches

Government Letter

8.0 x 10.5 inches

Envelope:

Monarch

 x 

 inches

Commercial-10

 x 

 inches

DL
C 5

162 x 229 mm

Paper size range using software commands

Width 98-216 mm (3.86-8.5 inches)

Printable area:

Length 148-356 mm (5.83-14 inches)

Paper feeding direction

Special sizes:

Basically, the paper area within a 1/4 inch
(6.4 mm) border is the printable area for any
paper size. Details for paper sizes using
SelecType are shown below.

Paper feed 

alignment 

and 

direction:

Center alignment for all sizes

Paper feed:

Automatic or manual feed

Input paper supply (75 

 or 20 lb paper):

100 sheets
150 sheets (optional multi-media feeder)
15 envelopes (optional multi-media feeder)

Paper eject:

Face-down only

Paper eject capacity (75 

 20 lb paper):

50 sheets

ALll-2

9/17/91

Consumable products

Toner 

cartridge (5050002):

Storage temperature: 0 to 30°C (32 to 80°F)
For less than 20 days -20 to 43°C (-4 to 110°F)

Storage humidity: 20% to 80% RH

For less than 20 days 5% to 95%

Shelf life: 18 months after production

Typical life is up to 5000 pages under the
following conditions: Letter-size paper,
continuous printing, and 5% print ratio.
Atmospheric pressure: No less than 740
millibar (about the same as 2500 m
or 8200 ft altitude).

The number of pages you can print with a
toner cartridge varies depending on the type
of printing. If you print dense text exceeding
the 5% print ratio, your cartridge may print
fewer pages.

Photoconductor unit (S051005):

Storage temperature: 0 to 30°C (32 to 80°F)

For less than 20 days -20 to 43°C
(-4 to 110°F)

Storage humidity: 20% to 80% RH
For less than 20 days 5% to 95%

Shelf life: 18 months after production

Life:

Photoconductor unit life is up to 30,000
pages. Atmospheric pressure: No less than
740 millibar (about the same as atmospheric
pressure at 2500 m or 8200 ft altitude).

Ozone filter (packaged 

with 

toner cartridge):

Replace at the same time as the toner
cartridge.

Mechanical

Dimensions 

and weight:

Height:

177 mm (7.0 inches)

356 mm (14.0 inches)*

Width:

479 mm (18.9 inches)
479 mm (18.9 inches)*

Depth:

362 mm (14.3 inches)
700 mm (27.6 inches)*

Weight:

Approx. 13 kg (29 lb.)*

* Including paper cassette, photoconductor

unit, output tray, and toner cartridge.

MPBF (Mean Prints Between 

Failures):

24,000 sheets (2,400 per month x 10 months)

MTBF (Mean Time 

Between 

Failures):

5,760 hours

Durability:

5 years or 180,000 sheets (3,000 per month x
60 months); whichever comes first.

Laser Printers

Summary of Contents for ActionLaser ActionLaser II












Reviews: