Epson 5550C - PowerLite SVGA LCD Projector User Manual Download Page 35

Page: 35 / 178

Connecting to a Computer

Connecting to a PC Laptop Computer

This section describes how to connect the projector to your PC
laptop with the projector’s video, audio, and mouse cables. (You
must connect the video cable; the audio and mouse cables are
optional.)

Connecting the projector’s video cable

Note:

Laptop configurations vary. See your computer manual for

the location of ports needed to connect your projector.

1. Turn off the projector and computer, if they’re on.

2. Connect either end of the projector’s video cable to the

Computer In port.

3. Connect the other end of the video cable to the laptop’s video

(monitor) port.

Computer In port

projector video cable

Summary of Contents for 5550C - PowerLite SVGA LCD Projector



















































































































































































Search results

Summary of Contents for 5550C - PowerLite SVGA LCD Projector

Reviews:

Epson 5550C - PowerLite SVGA LCD Projector, User Manual, Page: 35 / 178

Search results

Summary of Contents for 5550C - PowerLite SVGA LCD Projector

Reviews: