Epson 5550C - PowerLite SVGA LCD Projector, User Manual, Page: 141 / 178

4 • Using ELP Link III
128
2. Select the desired gamma correction:
Gamma 1 Provides the greatest degree of correction (a
dynamic image with a lot of contrast).
Gamma 2 Provides an image between Gamma 1 and Gamma
3.
Gamma 3 Provides a natural image.
3. Click Pattern Display to display a test pattern with the gamma
correction applied. If you’re not satisfied with the image, repeat
steps 2 and 3 using a different setting.
4. Click Close when you’re finished.
Running ELP Link III Without the Projector
You can run the ELP Link III software without the projector
connected if you want to prepare for a presentation and the projector
isn’t available. You can assign new functions to the Effects buttons
on the remote control, then save your changes as a set. You can
assign functions to your keyboard or define a key macro to use with
one of the Effects buttons. You can also create and save a new user
logo, although you can’t download it to the projector until the
projector is connected and operating.
To run ELP Link III without the projector connected, select
Unconnected and Execute from the Option menu.
Note: Always deselect this setting before exiting ELP Link III so the
program starts correctly the next time you use it.