Epson 5550C - PowerLite SVGA LCD Projector User Manual Download

Page: 24 / 178

1 • Setting Up the Projector

Attaching the Hand Strap

Follow the steps below to attach the hand strap to the projector with
the two screws included with the strap.

1. Gently place the projector on its side, so you are looking at the

bottom and the back of the projector is facing left.

Caution:

Do not lift or hold the projector by its lens; this can

damage the lens.

2. Locate the blue slider button on the bottom front of the projector

and slide the button up until the front strap connector is fully
extended

front strap connector

slider button

Summary of Contents for 5550C - PowerLite SVGA LCD Projector



















































































































































































Search results

Summary of Contents for 5550C - PowerLite SVGA LCD Projector

Reviews:

Related manuals for 5550C - PowerLite SVGA LCD Projector

Brands by name

Popular brands

Epson 5550C - PowerLite SVGA LCD Projector, User Manual

Search results

Summary of Contents for 5550C - PowerLite SVGA LCD Projector

Reviews:

Related manuals for 5550C - PowerLite SVGA LCD Projector

Brands by name

Popular brands