Epson 5350 - EMP SVGA LCD Projector, User Manual

Page: 10 / 182

Introduction
2
Your projector’s two speakers employ a built-in SRS 3D Sound System
for rich, powerful audio output. You can even connect an external
speaker when further amplification is required.
For your presentations, you can select front, rear, or ceiling projection.
This provides maximum flexibility in choosing the best display
method for each environment.
You control your projector through a hand-held remote control unit,
with menus provided for image source switching and image
adjustment. The remote control can also act as a wireless mouse to
control operations on your computer screen during presentations.
Additionally, you can install the projector’s ELP Link IV software to
control the projector’s settings from your computer and enhance your
presentations with special effects.
Your projector features a new patented SizeWise
™
chip for support of
SVGA, UGA, XGA, and SXGA (PowerLite 5350), and XGA, VGA,
SXGA and UXGA (PowerLite 7250 and 7350) output. No matter
what type of computer output is used, the result is a full-size video
image of outstanding clarity.
The projector supports a wide range of computers and workstations:
IBM
®
compatible PCs and laptops, Apple
®
Macintosh,
®
Power
Macintosh,
™
Power Macintosh G3,
™
iMac,
™
and PowerBook
®
computers, and workstations such as the Sun
®
SPARCstation.
™
(The PowerLite 5350 is not recommended for use with high-end
workstations). The video source can be HDTV, NTSC, PAL, or
SECAM. The projector automatically senses the video format, which
can be composite video, S-Video, or component video. See Chapter 7
for details on supported computers and video formats.