Autodesk AutoCAD, Version 10.0
The AutoCAD drivers conform to the Autodesk Device
Interface (ADI) for rendering and display drivers. The following
resolutions are available:
640
x
480 16-color graphics (R4V1480.EXE)
800
x
600 16-color graphics (R4V1600.EXE).
Installing the Drivers
Use the instructions in your AutoCAD documentation to
install the program on your hard disk. To install the drivers,
follow the steps below:
1.
Copy the driver files from your Utility 2 diskette to the
directory on your hard disk containing the AutoCAD
program. Log onto the AutoCAD directory. To copy the
files, insert the Utility 2 diskette into drive A: then type the
following and press
Enter:
COPY A:\ACAD10\*.*
2.
Prior to starting an AutoCAD or AutoShade session, you
must load the display driver into the computer’s memory.
Type the display driver program name at the MS-DOS
prompt and press
Enter.
For example, to load the driver for 800
x
600, 16-color
graphics, type the following and press
Enter:
R 4 V 1 6 0 0
A-14
Using the VGA Utilities