EPOX EP-GXB-M, Manual

Page: 55 / 90

EP-GXB-M Award BIOS Setup
Page 55
• Enabled: The system can use remote ring-in & WOL to wake the system up.
• Disabled: The system cannot use remote ring in & WOL to wake system up.
Power On by Alarm: This option allows you to have the system turn on at a preset
time each day or on a certain day. This option is only available when Power Loss
Recovery is Enabled. The default is Enabled.
• Enabled: The system will turn on at the preset time.
• Disabled: The system will not turn on until you turn it on.
Date (of month) Alarm: This is how you set the date that the system will turn on.
The default is 0.
• 0: System will turn on everyday on preset time.
• 1-31: Represents the day of the month that you need the system to turn on.
Time (hh:mm:ss) Alarm: This sets the time that you need the system to turn on.
The default is 08:00:00.
**Reload Global Timer Events ** These options allow the user to reset the global
power features timer if any of the enabled events occur.
• IRQ [3-7, 9-15], NMI: The default is Disabled.
• Primary IDE 0: The default is Disabled.
• Primary IDE 1: The default is Disabled.
• Secondary IDE 0: The default is Disabled.
• Secondary IDE 1: The default is Disabled.
• Floppy Disk: The default is Disabled.
• Serial Port: The default is Enabled.
• Parallel Port: The default is Disabled.