EPOX EP-GXB-M, Manual

Page: 61 / 90

EP-GXB-M Award BIOS Setup
Page 61
Onboard Serial Port 1: This field allows the user to configure the 1st serial port.
The default is Auto.
• AUTO: Enable onboard serial port 1 and address is auto adjusted
• COM1: Enable onboard serial port 1 and address is 3F8H/IRQ4.
• COM2: Enable onboard serial port 1 and address is 2F8H/IRQ3.
• COM3: Enable onboard serial port 1 and address is 3E8H/IRQ4.
• COM4: Enable onboard serial port 1 and address is 2E8H/IRQ3.
• Disabled: Disable onboard serial port 1.
Onboard Serial Port 2: This field allows the user to configure the 2nd serial port.
The default is Auto.
• AUTO: Enable onboard serial port 2 and address is auto adjusted
• COM1: Enable onboard serial port 2 and address is 3F8H/IRQ4.
• COM2: Enable onboard serial port 2 and address is 2F8H/IRQ3.
• COM3: Enable onboard serial port 2 and address is 3E8H/IRQ4.
• COM4: Enable onboard serial port 2 and address is 2E8H/IRQ3.
• Disabled: Disable onboard serial port 2.
UART Mode Select: This field allows the user to configure what IR mode the 2nd
serial port should use. The default is Normal.
• Options: Normal, IrDA, and ASKIR.
RxD, RxD Active: This field configures the receive and transmit signals generated
from the IR port. The default is Hi Lo (when UART Mode Select is not set to
Normal).
• Options: Hi Hi, Hi Lo, Lo Hi, and Lo Lo.
IR Transmitting delay: The default is Enabled (when UART Mode Select is not
set to Normal).
• Options: Enabled and Disabled.
Onboard Parallel port: This field allows the user to configure the LPT port. The
default is 378H / IRQ7.
• 378H: Enable onboard LPT port and address is 378H and IRQ7.
• 278H: Enable onboard LPT port and address is 278H and IRQ5.
• 3BCH: Enable onboard LPT port and address is 3BCH and IRQ7.
• Disabled: Disable onboard LPT port.