BIOS
Page 4-20
For example, if you have a processor that is rated at 2.4GHz and the clock genera-
tor is 200MHz, then 200MHz x 12 = 2.4GHz
Press <Enter> to display the following screen:
Key in the DEC (decimal) number for the New FSB Speed (QDR).
Overclocking failure will cause no display on the monitor. To overcome
this switch off the power supply and switch on again. Restart the
system, press and hold
<
Insert>
key. This will revert the BIOS to default
or initial setting.
New MEM Speed (DDR)
Enables you to increment the memory speed at 1 MHz step.
Press <Enter> to display the following screen:
Key in the DEC (decimal) number for the New MEM Speed (DDR).
Summary of Contents for EP-5NVA+SLI
Page 6: ...vi Page Left Blank...
Page 12: ...Introduction Page 1 6 1 3 System Block Diagram...
Page 76: ...Appendix B 4...
