Installation
Page 3-9
To install the dual VGA card in SLI Mode
mode, insert into both "Primary" and
"Secondary" VGA slot.
<Figure 16>
After installing VGA driver, enable the
Multi-Graphics Processor Unit (GPU)
feature in the NVIDIA nView properties
as shown left.
For SLI Mode, as "SLi Bridge" card (D)
must be installed to the golden fingers
(E) on the top of both VGA cards in order
to link the cards together.
For a single VGA in Single Mode, the
"SLi Bridge" card is not necessary.
D
E
<Figure 17>
When installing the VGA card, make
sure the card edge connector is fully
inserted into the slot and the clicker is
locked properly.
<Figure 15>
<Figure 18>
Summary of Contents for EP-5NVA+SLI
Page 6: ...vi Page Left Blank...
Page 12: ...Introduction Page 1 6 1 3 System Block Diagram...
Page 76: ...Appendix B 4...
