Installation
Page 3-16
3-6 T
T
T
T
Ther
her
her
her
hermo Stic
mo Stic
mo Stic
mo Stic
mo Stick Function (Optional)
k Function (Optional)
k Function (Optional)
k Function (Optional)
k Function (Optional)
This mainboard is equipped with a digital thermometer capability to monitor any
temperature. This is useful for measuring heat on peripherals such as VGA cards,
hard disk drives, DIMMs or even on-board components such as chipset,
MOSFETS, etc.
Thermo Stick consists of:
1) THM_ST header located on the mainboard
2) Thermo stick sensor cable with heat-tolerant adhesive
sticker optionally bundled in the mainboard package
3) USDM software utility
To setup Thermo Stick,
1. Insert the sensor cable to THM_ST header on the mainboard
2. Using the adhesive sticker, affix the sensor head of the cable to your desired point
of measure. e.g. the chipset as in the picture below. Trim the adhesive sticker to a
suitable size so that it will not affect the heat dissipation of any heatsink.
3. Ensure the cable is neatly tucked away from fans or other moving parts.
4. Install and run the USDM software. The temperature will be shown as below.
THM-ST
Summary of Contents for EP-5NVA+SLI
Page 6: ...vi Page Left Blank...
Page 12: ...Introduction Page 1 6 1 3 System Block Diagram...
Page 76: ...Appendix B 4...
