EPOX EP-3WDF2, Manual

Page: 44 / 83

BIOS EP-3WEF2/3WDF2
Page 4-14
USB Controller
Select Enabled if your system contains a Universal Serial Bus (USB) controller and
you have USB peripherals.
The choice: Enabled, Disabled.
USB Keyboard Support
Select Enabled if your system contains a Universal Serial Bus (USB) controller and
you have a USB keyboard.
The choice: Enabled, Disabled.
Init Display First
This item allows you to decide to active whether PCI Slot or on-chip VGA first
The choice: PCI Slot, Onboard .
AC97 Audio/Modem
This item allows you to decide to enable/disable the 810 chipset family to support
AC97 Modem.
Select Enable of AC97 Modem item, you must be secondary Modem Riser Card
(MR) in hardware.
The choice: Enabled, Disabled.
IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple sector
read/write. If your IDE hard drive supports block mode (most new drives do), select
Enabled for automatic detection of the optimal number of block read/writes per
sector the drive can support.
The choice: Enabled, Disabled
Power On Function
There are “ Button Only ”, “ Hot Key ” and “ Any key ” can be chosen by this field that
allows users to select one of these various functions as Power On Method for their
requirement. The default value in this selection is “ Hot Key”. (Ctrl-F1)
Hot Key:
User can press “Control Key” (Ctrl) and “Function Key” (from F1
to F12) individually to power on the system. The interval between
“Ctrl” key and function Key (F1-F12)must be short.
Anykey: Press anykey to power on the system.
Button Only: This power on function controlled by J3 (pw-on.) Use Power On
Button to power on the system.